Steel Pipe Clamps / Piping Hangers /Pipe supports

Steel pipe clamps, pipe hangers and pipe supports are widely used for installing, fastening, and guiding the pipes and tubes in piping systems of various industries. Sometimes pipe clamps, pipe hangers and pipe supports are actually the same or similar products, but some times they are slightly different. 

Younglee Pipe Clamp Factory is a professional and leading pipe support & pipe clamp manufacturer in China. We produce and supply various types of standard and customized pipe clamps /tube clamp, pipe hangers, pipe brackets, pipe clips, pipe holder, pipe mounting bracket, and so on.

Here below are the Pipe clamps, Pipe support Younglee can produce and supply

Pipe clamps, pipe supports Younglee supply

Table of Contents
  1. What are pipe clamps, pipe supports and pipe hangers?
  2. Materials of Pipe clamps
  3. Size Range of Pipe clamps
  4. Specifications of Pipe clamps, Pipe support and pipe hangers
  5. Surface finish of Pipe support
  6. Pipe Clamp insulation
  7. Types of Pipe clamps & Pipe supports
  8. Main advantages of our pipe clamps / pipe support
  9. Applications of our Pipe Clamps / Pipe supports

 

What are pipe clamps, pipe supports and pipe hangers?

A pipe clamp is a bolted pipe attachment which clamps around the pipe to connect the pipe to the remainder of a pipe hanger assembly.

A pipe support or pipe hanger is a designed industrial product that transfer the load from a pipe or tube to the supporting structures. The load includes the weight of the pipe proper, the content that the pipe carries, all the pipe fittings attached to pipe, and the pipe covering such as insulation. The four main functions of a pipe support are to anchor, guide, anti-vibration, and support a specified load. Pipe supports used in high or low temperature applications may contain insulation materials.

Pipe clamps are widely used for supporting suspended pipes. They are also used to work as clamped pipe shoes. Pipe clamps can be defined as bolted circular or semi-circular pipe attachments that clamp around a pipe or a tube and connect the pipe with other assembly components for proper support. These piping clamps transfer loads of the piping system to the structure. A wide variety of piping clamps are available to use as pipe support attachments.

Materials of Pipe clamps

Our factory’s pipe clamps are available in a wide range of materials upon customers’ request. And here below are the list of some popular materials for manufacturing the pipe clamps and supports.

  • Carbon steel: including A36, ST52.3, E355, E235 and so on.
  • Stainless steel: such as 304 stainless steel, 316 SS / 316L SS, 316Ti and so on. Stainless steel pipe clamps are widely used in applications where anti-corrosion is required.
  • Aluminum:
  • Plastic: Including PP, PA, Nylon, PE, PVC, etc. Pipe clamps with these materials are known as plastic pipe clamps, nylon pipe clamps, PVC pipe clamps and so on.
  • Rubber: rubber pipe clamps are usually refer to the rubber coated or lined pipe clamps.

 

Size Range of Pipe clamps

As one of the leading China pipe clamp manufacturers, our factory produces a broad size ranges of pipe clamps and supports. Our pipe clamps, hangers and supports are fit for pipes with size range as below.

NPS Size 1/4″ inch to 36″ inch; or metric size pipes with O.D 6 mm to O.D 1200 mm.

Our factory manufacturers standard sizes and also customized sizes pipe clamps.

Specifications of Pipe clamps, Pipe support and pipe hangers

Our pipe clamps, hangers and supports either are manufactured according to some international standards, or customized according to customers’ drawings and specifications. Depends on the different types, here below are the most popular specification standards our factory can follow.

  • DIN 3015 standard: DIN 3015-1, DIN 3015-2, DIN3015-3
  • DIN 3567-A, DIN 3567-B: this is the DIN standard for two bolt steel pipe clamps and three bolt steel pipe clamps.
  • DIN 3570: this is the specification standard for U bolt pipe clamps.
  • DIN 1592, DIN 1593, DIN1596, DIN1597: these are the standards for some small size tube clamps.

As a professional and big China pipe clamp manufacturer & supplier, we also produce pipe clamps, hangers and support as per MSS Standards, like below.

  • MSS SP-58-2009: Pipe Hangers and Supports –Materials, Design, Manufacture, Selection, application, and Installation
  • MSS SP-69: Pipe Hangers and Supports –Selection and application

Besides the above standards, we also produced pipe supports, hangers and clamps according to the standards of some famous companies, such as DANIELI, its pipe support standards are designed for applications of steel mill constructions, metallurgical equipment manufacturing, construction and installation in the industrial field of ferrous metallurgy and many fields of non-ferrous metallurgy; and MODEC, Modec standard pipe support are mostly designed for FPSO/FSO applications and other Oil and Petro-Chemical industrial applications.

Surface finish of Pipe support

For Stainless steel pipe clamps & pipe supports, the surface finishing is available as below.

  • Pickled surface, with scales and rust removed
  • Polished and cleaned
  • Sandblasting
  • Xylan coated; PTFE coated for some special requirements.

For carbon steel pipe clamps and pipe supports, we provide more surface finish options to our customers as below, mostly for the reason of anti-corrosion.

  • Zinc coated: known as cold galvanized also, with white or yellow bright surface
  • Hot dipped galvanized: HDG pipe clamps have good corrosion resistant performance.
  • Phosphated
  • Painted /coated surface such as epoxy coating, Xylan coating, PTFE coating and so on.
  • Rubber insulated; PTFE insulated surface

Besides the above surface finishing, we also provide customized pipe clamp surface finishing upon customers’ requirements.

 

Pipe Clamp insulation

For the reasons such as corrosion resistant, anti-vibration, protecting the piping from damage, or protecting the coating of the piping, or for easy moving, sometimes the pipe clamps and pipe supports are insulated with rubber, PTFE, plastic and other materials. These are known as pipe clamp cushion also.

And, for reliable fixings of refrigeration and air conditioning pipelines, the insulated pipe clamps are required. Our pipe clamp factory can provide all kinds of pipe clamp insulation (pipe clamp cushion) upon customer’s requests.

Here below are the most popular insulation materials.

  • Rubber: typically EPDM, NBR
  • Plastics: Such as TPU, PE, PVC, TPE and so on.
  • PTFE (Teflon)
  • ThermoPlastic Elastomer
  • POLYURETHANE & PHENOLIC FOAM
  • Other insulation materials.

Rubber cushioned pipe clamps

 

Types of Pipe clamps & Pipe supports

 

As the leading China pipe clamp manufacturer, our factory produces various types of pipe clamps, pipe hangers, pipe supports as below list.

Pipe clamps designed and produced as per DIN 3015-1, DIN 3015-2, DIN3015-3, mostly used in various hydraulic systems, this type of pipe clamps are known as plastic pipe clamps also.

  • LIGHT TWO BOLT PIPE CLAMP


SIZE RANGE: NPS 1/2 inch to NPS 36 inches (Metric size available for pipe O.D 12 mm to O.D 1200 mm)
MATERIAL: Carbon steel, stainless steel 304/304L, stainless steel 316 /316L
FINISH: Black, cold galvanized, hot dipped galvanized(HDG), painted/coated surface for carbon steels, pickled surface for stainless steels.
APPLICATION: Recommended for suspension of cold pipe lines or hot lines where little or no insulation is required.
MAX. TEMP.: 750°F (400°C)
ORDERING: Specify figure number, pipe size, description and finish.

Here below is the typical dimensions of light duty two bolt pipe clamps. Besides the below dimensions, we can also produce two bolt pipe clamps with customized drawings and specifications of customer.

PIPE SIZE

MAX. RECOM. LOAD, lbs.

B

C

D

E

F

STOCK SIZE

H

APPROX. WEIGHT

@ 650° F

@ 750° F

G

lbs. per each

1/2

500

445

1

1/2

1 17/32

1

5/16

1/8 x 1

1 17/32

0.29

3/4

500

445

1 1/8

1/2

1 21/32

1 1/8

5/16

1/8 x 1

1 21/32

0.33

1

500

445

1 1/8

1/2

1 29/32

1 3/8

5/16

1/8 x 1

1 21/32

0.35

1 1/4

500

445

1 7/16

1/2

1 31/32

1 7/16

5/16

1/8 x 1

1 31/32

0.37

1 1/2

800

715

1 9/16

1/2

2 5/32

1 5/8

5/16

1/8 x 1

2 3/32

0.43

2

1040

930

2 1/8

1/2

2 3/4

2 1/8

1/2

1/4 x 1

2 3/4

1.1

2 1/2

1040

930

2 1/2

5/8

3 1/4

2 5/8

1/2

1/4 x 1

3 1/8

1.2

3

1040

930

2 13/16

5/8

3 9/16

2 15/16

1/2

1/4 x 1

3 7/16

1.4

3 1/2

1040

930

3 1/8

5/8

3 13/16

3 3/16

1/2

1/4 x 1

3 3/4

1.5

4

1040

930

3 7/16

3/4

4 3/8

3 5/8

5/8

1/4 x 1 1/4

4 3/16

2.3

5

1040

930

4

3/4

4 15/16

4 3/16

5/8

1/4 x 1 1/4

4 3/4

2.6

6

1615

1440

4 7/8

7/8

5 7/8

5

3/4

3/8 x 1 1/2

5 3/4

5.4

8

1615

1440

6

1

7

6 1/8

3/4

3/8 x 1 1/2

6 7/8

6.5

10

2490

2220

7 5/16

1

8 9/16

7 7/16

7/8

1/2 x 2

8 7/16

13.6

12

2490

2220

8 1/4

1

9 9/16

8 7/16

7/8

1/2 x 2

9 3/8

15.2

14

2490

2220

9

1 1/8

10 5/8

9 1/4

7/8

1/2 x 2 1/2

10 3/8

20.5

16

2490

2220

10

1 1/8

11 5/8

10 1/4

7/8

1/2 x 2 1/2

11 3/8

22.3

18

3060

2730

11 1/2

1 1/4

13

11 5/8

1

5/8 x 2 1/2

12 7/8

31.6

20

3060

2730

12 1/2

1 3/8

14 1/8

12 3/4

1 1/8

5/8 x 2 1/2

13 7/8

35.8

24

3060

2730

15

1 5/8

16 7/8

15 1/4

1 1/4

5/8 x 3

16 5/8

53.1

30

3500

3360

18 1/4

2

21 1/4

19

1 3/4

3/4 x 4

20 5/8

113.9

36

4000

3570

22 1/2

2 1/2

25 1/2

23

2

1 x 5

25

219.0

  • HEAVY DUTY TWO BOLT CLAMP


SIZE RANGE: NPS 3 inches thru 36 inches (Metric size available for pipe O.D 12 mm to O.D 1200 mm)
MATERIAL: Carbon steel, stainless steel 304/304L, stainless steel 316 /316L
SURFACE FINISH: Black, cold galvanized, hot dipped galvanized(HDG), painted/coated surface for carbon steels, pickled surface for stainless steels.
APPLICATIONS: Recommended for suspension of cold or hot pipe lines with heavy load having little or no insulation.
MAX. TEMP.: 750°F (400°C)
ORDERING: Specify figure number, pipe size, description and finish.

Here below is the typical dimensions of heavy two bolt pipe clamps. Besides the below dimensions, we can also produce heavy two bolt pipe clamps with customized drawings and specifications of customer.

PIPE SIZE

MAX. RECOM. LOAD, lbs.

B

C

D

E

F

STOCK SIZE

H

K

APPROX. WEIGHT (lbs. per each)

@ 650° F

@ 750° F

G

3

3370

3005

2 15/16

1

4

3 1/8

3/4

5/16 x 2

3 13/16

5/8

3.60

3 1/2

3370

3005

3 1/4

1

4 1/4

3 3/8

3/4

5/16 x 2

3 13/16

5/8

3.90

4

3515

3135

3 9/16

1

4 7/8

3 3/4

7/8

3/8 x 2

4 11/16

5/8

5.50

5

3515

3135

4 1/8

1

5 1/2

4 3/8

7/8

3/8 x 2

5 1/4

5/8

6.30

6

4865

4340

5

1 1/8

6 5/8

5 1/4

1

1/2 x 2 1/2

6 3/8

7/8

11.70

8

4865

4340

6 1/8

1 1/8

7 5/8

6 1/4

1

1/2 x 2 1/2

7 1/2

7/8

13.90

10

6010

5360

7 9/16

1 1/4

9 1/16

7 11/16

1 1/4

5/8 x 2 1/2

8 15/16

7/8

22.30

12

8675

7740

9

1 5/8

10 7/8

9 1/4

1 1/2

3/4 x 3

10 5/8

7/8

38.10

14

9120

8135

9 3/4

1 5/8

11 7/8

10

1 1/2

3/4 x 4

11 5/8

7/8

46.80

16

9120

8135

10 3/4

1 5/8

12 7/8

11

1 1/2

3/4 x 4

12 5/8

7/8

51.40

18

13800

12305

14 1/2

3

17 1/4

14 1/2

2

3/4 x 6

17 1/4

3

130.10

20

15300

13645

16

3

18 3/4

16

2

1 x 5

18 3/4

3

163.60

24

16300

14535

18 1/2

3 1/4

21 1/2

18 1/2

2 1/4

1 x 6

21 1/2

3 1/4

215.00

28

18000

16055

20 1/2

3 1/4

23 1/2

20 1/2

2 1/4

1 x 8

23 1/2

3 1/4

303.00

30

20500

18285

22 1/2

3 1/2

26

22 1/2

2 1/2

1 1/4 x 7

26

3 1/2

365.40

32

23750

21180

23 1/2

3 1/2

27

23 1/2

2 1/2

1 1/4 x 8

27

3 1/2

432.00

34

25000

22295

25

3 1/2

28 1/2

25

2 1/2

1 1/2 x 8

28 1/2

3 1/2

534.00

36

28000

24975

26 1/2

3 1/2

30 1/4

26 1/2

2 3/4

1 1/2 x 8

33 3/4

3 1/2

575.00

  • LIGHT THREE BOLT PIPE CLAMP


SIZE RANGE: NPS size 1/2 inch thru 36 inches (Metric size available for pipe O.D 12 mm to O.D 1200 mm)
MATERIAL: Alloy steel, carbon steel, stainless steel 304/304L, stainless steel 316 /316L
FINISH: Black, cold galvanized, hot dipped galvanized(HDG), painted/coated surface for carbon steels, pickled surface for stainless steels.
APPLICATIONS: Recommended for suspension of cold or hot pipe lines requiring little insulation or insulation up to 4 inches
MAX. TEMP.: 750°F (400°C)
ORDERING: Specify figure number, pipe size, description and finish.

Here below is the typical dimensions of light three bolt pipe clamps. Besides the below dimensions, we can also produce light duty three bolt pipe clamps with customized drawings and specifications of customer.

PIPE SIZE

MAX. RECOM. LOAD, lbs.

B

C

D

E

F

G

H

APPROX. WEIGHT

@ 650° F

@ 750° F

lbs. per each

1/2

950

850

15/16

5/16

2 7/8

2 7/16

3/8

3/16 x 1

1 3/8

0.66

3/4

950

850

15/16

5/8

2 7/8

2 7/16

3/8

3/16 x 1

1 3/8

0.70

1

950

850

1 1/16

5/8

3

2 9/16

3/8

3/16 x 1

1 1/2

0.76

1 1/4

950

850

1 1/4

5/8

3 1/8

2 11/16

3/8

3/16 x 1

1 11/16

0.81

1 1/2

1545

1380

1 13/16

1 1/16

4 7/8

4 1/8

5/8

1/4 x 1 1/4

2 3/8

2.30

2

1545

1380

2 1/8

1 1/16

5 7/8

5 1/8

5/8

1/4 x 1 1/4

2 11/16

2.60

2 1/2

1545

1380

2 5/16

1 1/16

6 1/8

5 3/8

5/8

1/4 x 1 1/4

2 15/16

2.70

3

1545

1380

2 3/4

1 1/16

6 11/16

5 15/16

5/8

1/4 x 1 1/4

3 1/2

3.00

4

2500

2230

3 3/8

1 1/16

7 5/8

6 1/2

3/4

5/16 x 2

4 1/2

6.70

5

2500

2230

3 15/16

1 1/16

8 1/8

7

3/4

5/16 x 2

5

7.00

6

2865

2555

4 3/4

1 7/16

9 11/16

8 9/16

7/8

3/8 x 2 1/2

6 1/8

11.50

8

2865

2555

5 3/4

1 7/16

10 11/16

9 9/16

7/8

3/8 x 2 1/2

7 1/8

13.20

10

3240

2890

6 7/8

1 7/16

12

10 5/8

1

1/2 x 2 1/2

8 1/4

19.80

12

3240

2890

7 7/8

1 7/16

13

11 5/8

1

1/2 x 2 1/2

9 1/4

22.30

14

4300

3835

9 1/16

2

14 5/16

12 11/16

1 1/4

5/8 x 3

10 11/16

37.70

16

4300

3835

10 1/16

2

15 5/16

13 11/16

1 1/4

5/8 x 3

11 11/16

41.40

18

4300

3835

11 1/16

2

16 5/16

14 11/16

1 1/4

5/8 x 3

12 11/16

44.90

20

5490

4900

12 3/8

2

17 5/8

15 7/8

1 1/2

3/4 x 3

14

57.30

24

4500

4015

14 3/8

2

19 5/8

17 7/8

1 1/2

3/4 x 3

16

65.90

28

6000

5340

17 1/2

2 1/4

24 1/4

21 3/4

1 1/2

3/4 x 4

20

112.30

30

7500

6675

18 1/2

2 1/2

26 1/8

23 3/8

1 1/2

3/4 x 5

21 1/4

150.00

36

10500

9345

22 1/2

3

32 1/4

28 3/4

1 3/4

1 x 5

26

257.50

  • ALLOY THREE BOLT PIPE CLAMP


SIZE RANGE: NPS 1/2 inch to NPS 36 inches (Metric size available for pipe O.D 12 mm to O.D 1200 mm)
MATERIAL: Chrome molybdenum steel (ASTM A387), 42CrMo, SAE4140
FINISH: Black, cold galvanized, hot dipped galvanized(HDG), painted/coated surface, pickled surface.
APPLICATIONS: Recommended for suspension of hot pipe lines requiring up to 4″ of insulation.
MAX. TEMP.: 1050°F (565°C)
ORDERING: Specify figure number, pipe size, description and finish.

Here below is the typical dimensions of alloy three bolt pipe clamps. Besides the below dimensions, we can also produce alloy three bolt pipe clamps with customized drawings and specifications of customer.

PIPE SIZE

MAX. RECOM. LOAD, lbs.

B

C

D

E

F

G

H

APPROX. WEIGHT (lbs. per each)

@ 750° F

@ 1000° F

@ 1050° F

1/2

860

610

455

15/16

5/16

2 7/8

2 7/16

3/8

3/16 x 1

1 3/8

0.66

3/4

860

610

455

15/16

5/8

2 7/8

2 7/16

3/8

3/16 x 1

1 3/8

0.70

1

860

610

455

1 1/16

5/8

3

2 9/16

3/8

3/16 x 1

1 1/2

0.76

1 1/4

860

610

455

1 1/4

5/8

3 1/8

2 11/16

3/8

3/16 x 1

1 11/16

0.81

1 1/2

1410

1000

745

1 13/16

1 1/16

4 7/8

4 1/8

5/8

1/4 x 1 1/4

2 3/8

2.30

2

1410

1000

745

2 1/8

1 1/16

5 7/8

5 1/8

5/8

1/4 x 1 1/4

2 11/16

2.60

2 1/2

1410

1000

745

2 5/16

1 1/16

6 1/8

5 3/8

5/8

1/4 x 1 1/4

2 15/16

2.70

3

1410

1000

745

2 3/4

1 1/16

6 11/16

5 15/16

5/8

1/4 x 1 1/4

3 1/2

3.00

4

2290

1625

1200

3 3/8

1 1/16

7 5/8

6 1/2

3/4

5/16 x 2

4 1/2

6.70

5

2290

1625

1200

3 15/16

1 1/16

8 1/8

7

3/4

5/16 x 2

5

7.00

6

2620

1860

1380

4 3/4

1 7/16

9 11/16

8 9/16

7/8

3/8 x 2 1/2

6 1/8

11.50

8

2620

1860

1380

5 3/4

1 7/16

10 11/16

9 9/16

7/8

3/8 x 2 1/2

7 1/8

13.20

10

2970

2100

1565

6 7/8

1 7/16

12

10 7/16

1

1/2 x 2 1/2

8 1/4

19.80

12

2970

2095

1555

7 7/8

1 7/16

13

11 7/16

1

1/2 x 2 1/2

9 1/4

22.30

14

3915

2795

2060

9 1/16

2

14 5/16

12 11/16

1 1/4

5/8 x 3

10 11/16

37.70

16

3915

2795

2060

10 1/16

2

15 5/16

13 11/16

1 1/4

5/8 x 3

11 11/16

41.40

18

3915

2795

2060

11 1/16

2

16 5/16

14 11/16

1 1/4

5/8 x 3

12 11/16

44.90

20

4995

3550

2635

12 3/8

2

17 5/8

15 7/8

1 1/2

3/4 x 3

14

57.30

24

4995

3550

2635

14 3/8

2

19 5/8

17 7/8

1 1/2

3/4 x 3

16

65.90

28

5475

3890

2900

17 1/2

2 1/4

24 1/4

21 3/4

1 1/2

3/4 x 4

20

112.30

30

6850

4860

3630

18 1/2

2 1/2

26 1/8

23 3/8

1 1/2

3/4 x 5

21 1/4

150.00

36

9580

6800

5070

22 1/2

3

32 1/4

28 3/4

1 3/4

1 x 5

26

257.50

  • HEAVY THREE BOLT PIPE CLAMP


SIZE RANGE: NPS 1/2 inch to NPS 36 inches (Metric size available for pipe O.D 12 mm to O.D 1200 mm)
MATERIAL: Alloy steel, carbon steel, stainless steel 304/304L, stainless steel 316 /316L
FINISH: Black, cold galvanized, hot dipped galvanized(HDG), painted/coated surface for carbon steels, pickled surface for stainless steels.
APPLICATIONS: Recommended for suspension of cold pipe lines or hot lines where little or no insulation is required.
MAX. TEMP.: 750°F (400°C)
ORDERING: Specify figure number, pipe size, description and finish.

Here below is the typical dimensions of heavy three bolt pipe clamps. Besides the below dimensions, we can also produce heavy three bolt pipe clamps with customized drawings and specifications of customer.

PIPE SIZE

MAX. RECOM. LOAD, lbs.

B

C

D

E

F

G

H

APPROX. WEIGHT lbs. per each

@ 650° F

@ 750° F

1 1/2

2710

2420

2 1/8

1

5 13/16

5

3/4

3/8 x 2

3 1/8

5.5

2

2710

2420

3

1

6 1/16

5 1/16

3/4

3/8 x 2

4

5.7

3

2710

2420

3 5/8

1 1/2

8

6 1/2

3/4

3/8 x 2

5 1/8

7.5

4

3500

3125

4 1/2

1 3/4

9

7

7/8

3/8 x 2 1/2

6 1/2

10.7

6

3500

3125

4 3/4

1 3/4

10 3/16

8 15/16

1

3/8 x 2 1/2

6

12.0

8

4800

4285

6

2

11 3/8

10 1/8

1 1/8

1/2 x 2 1/2

7 1/4

18.5

10

5500

4910

7 1/4

2 1/4

13 1/8

11 3/8

1 1/4

1/2 x 3 1/2

9

30.3

12

7000

6250

8 5/8

2 1/2

14 5/16

12 9/16

1 3/8

5/8 x 3 1/2

10 3/8

42.0

14

9500

8485

9 5/8

2 1/2

15 1/2

13 1/2

1 1/2

3/4 x 4

11 5/8

60.0

16

10000

8930

10 7/8

3

17 1/8

14 7/8

1 3/4

3/4 x 4 1/2

13 1/8

80.0

18

13800

12325

12 1/2

3 1/2

18 1/4

16 1/4

2

1 x 4

14 1/2

115.0

20

15300

13665

13 1/2

3 1/2

19 3/4

17 1/4

2

1 x 5

16

140.0

24

16300

14555

15 1/2

3 1/2

22 5/16

19 5/16

2

1 x 6

18 1/2

190.0

28

18000

16055

18 7/8

4

31 3/4

27 1/4

2 1/4

1 x 7

23 3/8

354.0

30

20500

18285

19 7/8

4 1/4

32 3/4

28 1/4

2 1/4

1 x 8

24 3/8

406.0

36

28000

24975

24 5/8

4 1/2

40 1/4

34 3/4

2 3/4

1 1/2 x 8

30 1/8

678.0

  • RISER CLAMP / EXTENSION PIPE CLAMPS


SIZE RANGE: NPS 1/2 inch to NPS 24 inches (Metric size available for pipe O.D 12 mm to O.D 1200 mm)
MATERIAL: Alloy steel, carbon steel, stainless steel 304/304L, stainless steel 316 /316L
FINISH: Black, cold galvanized, hot dipped galvanized(HDG), painted/coated surface for carbon steels, pickled surface for stainless steels.
APPLICATIONS: For support and steadying of steel pipe risers either insulated or bare, cast iron pipe, or conduit.
MAX. TEMP.: 650°F (343°C)
ORDERING: Specify figure number, pipe size, description and finish.

Here below is the typical dimensions of riser pipe clamps. Besides the below dimensions, we can also produce riser clamps with customized drawings and specifications of customer.

PIPE SIZE

MAX. RECOM. LOAD

APPROX. WEIGHT

LENGTH

STOCK SIZE

BOLT SIZE

lbs.

lbs. per 100

A

1/2

255

123

9 3/8

3/16 x 1 1/4

3/8 x 1 1/2

3/4

255

136

9 3/8

3/16 x 1 1/4

3/8 x 1 1/2

1

255

138

9 5/8

3/16 x 1 1/4

3/8 x 1 1/2

1 1/4

390

195

10

1/4 x 1 1/4

3/8 x 1 1/2

1 1/2

390

201

10 3/8

1/4 x 1 1/4

3/8 x 1 1/2

2

390

217

10 3/4

1/4 x 1 1/4

7/16 x 2

2 1/2

390

229

11 1/4

1/4 x 1 1/4

7/16 x 2

3

530

250

12

1/4 x 1 1/4

7/16 x 2

3 1/2

670

330

13

1/4 x 1 1/2

1/2 x 2

4

810

342

13 1/2

1/4 x 1 1/2

1/2 x 2

5

1160

493

14 1/2

1/4 x 2

1/2 x 2

6

1570

526

15 1/2

1/4 x 2

1/2 x 2

8

2500

986

18 1/2

3/8 x 2

5/8 x 2 1/2

10

2500

1112

20 3/4

3/8 x 2

5/8 x 2 1/2

12

2700

1662

22 3/4

1/2 x 2

5/8 x 3

14

2700

1925

24

1/2 x 2

5/8 x 3

16

2900

3250

26

5/8 x 2 1/2

3/4 x 3 1/2

18

2900

3375

28

5/8 x 2 1/2

3/4 x 3 1/2

20

2900

3500

30

5/8 x 2 1/2

3/4 x 3 1/2

24

3200

5070

36

5/8 x 3

7/8 x 3 1/2

  • FABRICATED RISER CLAMP


APPLICATIONS:
In situations where the use of a welded lug attachment would create an undesirable crushing effect on the pipe wall, this clamp can transfer the load from the pipe wall to the riser clamp by means of hold-down lugs welded to the pipe.

Clamps may be furnished in either Carbon or Alloy steel with bolting to suit, using an allowable stress of 10,000 PSI. Temperature correction factors listed in “CHART A” are based on allowable stresses listed in MSS-SP-58.

METHODS OF SELECTION:
1. Determine total load to be supported and service temperature of the piping system.
2. Refer to “CHART A (table below)” and determine the temperature correction factor for the clamp material being used.
3. Multiply total load by the correction factor to obtain a corrected load.
4. Refer to “CHART C (below)” and locate the point determined by the intersection of the total load co-ordinate and the pipe size curve. Project this point horizontally until it intersects with the “D” dimension coordinate. Directly above this point is the required stock size.
5. The bolt diameter is obtained by using the uncorrected total load and referring to “CHART B (below)”.

ORDERING: Specify pipe outside diameter, total load, design temperature, material and dimension “D” or center to center of hanger rods.

NOTE: Pipe clamp can be fabricated to any specified material.

CHART A – STRESS-TEMPERATURE CORRECTION FACTORS

Material Specification

DESIGN TEMPERATURE °F

ASTM

GRADE

650

700

750

800

850

900

950

1000

1050

1100

1150

1200

A 36

0.8

0.83

0.89

1.06

A . 387

11

0.66

0.66

0.66

0.66

0.69

0.76

0.91

1.53

A . 387

22

0.66

0.66

0.66

0.66

0.69

0.76

0.91

1.28

1.72

2.38

A . 240

304

0.94

0.95

0.96

0.97

0.99

1

1.02

1.02

1.11

1.21

1.45

1.81

CHART B – CLAMP SPACING AND BOLT SIZES

Uncorrected Total Load lb.

3,400

4,700

6,200

8,000

10,000

12,000

16,000

19,000

25,000

32,000

40,000

55,000

67,000

82,000

96,000

118,000

135,000

154,000

BOLT – B

5/8

3/4

7/8

1

1 1/8

1 1/4

1 3/8

1 1/2

1 3/4

2

2 1/4

2 1/2

2 3/4

3

3 1/4

3 1/2

3 3/4

4

BOLT – C

3/4

7/8

1

1

1 1/8

1 3/8

1 1/2

1 3/4

2

2

2 1/4

2 1/2

2 3/4

3

3

SPACE – S

7/8

1

1 1/4

1 1/2

1 1/2

1 3/4

1 7/8

2 1/4

2 1/4

2 1/2

3

3 1/4

3 1/2

4

4

4 1/4

4 1/2

4 3/4


 

  • U BOLT PIPE CLAMPS

U bolt pipe clamp is known as U bolt clamp and U bolt, it is made of steel round bar, and can fully surrounds pipe, conduit, and tubing for a secure fit. As one of the leading China pipe clamp manufacturer factories, we produce and supply various types of U bolt clamps, and with different accessories.

Corrosion prevention as common U-bolts and pipe caused by contact between the accelerated corrosion of metal. Corrosion and erosion over the final holes into pinhole leaks. Using sharp U-rubber bolts step can remove the above-corrosion.

Our factory Younglee’s U-bolt rubber sheath for the ethylene-propylene rubber (EPDM), and its superior resistance to ultraviolet radiation, even prolonged exposure to direct sunlight and still maintain stability; maximum working temperature can reach 160 degrees. Low surface friction coefficient, tear capability and, in the bolts are tightened to protect pipe coating from damage, both insulation and cushioning effect. 

Hot-dip zinc plating, cadmium, XYLAN coated U-bolts to ensure the bulk of the corrosion resistance, but can also provide stainless steel bolts.  

  • For diameter: 1/2-36 “DN20-DN900 
  • U-bolt material: carbon steel, alloy steel, stainless steel, with four matching nut 
  • Bolt surface treatment: galvanized, hot dip zinc, xylan 

  • Stainless steel and alloy steel pipes used for orientation
  • Using Teflon lined (PTFE) has low friction, self lubricating, maintenance-free, high load, adaptability and other characteristics
  • Part of U-bolts and nuts can be galvanized, hot dip zinc plating, cadmium, xylan and other corrosion protection to meet different requirements
  • Size: 1 / 2 “- 20”
  • Operating temperature: -35 ℃ – 125 ℃
  • HOLD-DOWN PIPE CLAMPS

Hold-down pipe clamps are used in various industrial applications where you would like to either 1.) anchor the pipe in position or 2.) permit axial movement of the pipe. Slide plates, such as PTFE, 25% glass filled or graphite, can be incorporated into the design to decrease the friction between the pipe and clamp.

As a professional China pipe clamp manufacturer, our factory produces some different types of hold down pipe clamps as below.

  • ANCHOR TYPE HOLD-DOWN


For Pipe Sizes 2-6 inclusive

For Pipe sizes 8-36 inclusive

MATERIAL: Alloy steel, carbon steel, stainless steel 304/304L, stainless steel 316 /316L
FINISH: Black, cold galvanized, hot dipped galvanized(HDG), painted/coated surface for carbon steels, pickled surface for stainless steels.
TEMP: 750°F (400°C)
APPLICATIONS: Fig. PTP HD-1 hold down pipe clamp is an anchor type hold down. This hold down clamp is generally used on pipe lines where little or no insulation is required.
ORDERING: Specify figure number, pipe size and description.

PIPE SIZE

A

B

C

D

E

R

T

2

9 3/8

3 3/16

2 3/8

3 1/2

15/16

1 3/16

1/4

3

10 1/2

3 3/4

3 1/2

3 1/2

1 1/2

1 3/4

3/8

4

11 1/2

4 1/4

4 1/2

3 1/2

2

2 1/4

3/8

6

13 5/8

5 5/16

6 5/8

3 1/2

3 1/16

3 5/16

3/8

8

16

6 1/2

8 5/8

3 11/16

4 1/16

4 5/16

3/8

10

19

8

10 3/4

4 1/8

5 1/8

5 3/8

3/8

12

21

9

12 3/4

4 1/8

6 1/8

6 3/8

1/2

14

23

10

14

4 1/2

6 3/4

7

1/2

16

25

11

16

4 1/2

7 3/4

8

1/2

18

27

12

18

4 1/2

8 3/4

9

1/2

20

29

13

20

4 1/2

9 3/4

10

1/2

24

33

15

24

4 1/2

11 3/4

12

1/2

30

39

18

30

4 1/2

14 3/4

15

1/2

36

45

21

36

4 1/2

17 3/4

18

1/2

  • HOLD-DOWN FOR LATERAL RESTRAINT


MATERIAL: Alloy steel, carbon steel, stainless steel 304/304L, stainless steel 316 /316L, etc.
FINISH: Black, cold galvanized, hot dipped galvanized (HDG), painted/coated surface, pickled surface.
TEMP: 400°F (205°C)
APPLICATIONS: Fig. PTP HD-2 hold down pipe clamp is a restraint type hold down. The hold down clamp steel radius as well as the base is lined with high quality PTFE, 25% glass filled, slide plate, allowing axial movement while restraining lateral movement. It is generally used on compressor lines where temperature is high and thermal movement is great.
ORDERING: Specify figure number, pipe size and description.

PIPE SIZE

A

B

C

D

E

F

G

R

T

2

9 5/8

3 9/16

2 1/2

3 9/16

3/4

2 1/2

1 1/4

1 1/4

1/4

3

10 3/4

4 1/8

3 5/8

3 9/16

1 5/16

2 1/2

1 1/4

1 13/16

1/4

4

11 3/4

4 5/8

4 5/8

3 9/16

1 13/16

2 1/2

1 1/4

2 5/16

1/4

6

14 1/2

6

6 3/4

3 7/8

2 7/8

4

1 1/4

3 3/8

3/8

8

16 1/2

6 5/8

8 3/4

3 7/8

3 7/8

4

1 1/4

4 3/8

3/8

10

18 5/8

8 1/16

10 7/8

3 7/8

4 15/16

4

1 1/4

5 7/16

3/8

12

21 3/4

9 5/8

12 7/8

4 7/16

5 15/16

4

1 1/4

6 7/16

1/2

14

23

10 1/4

14 1/8

4 7/16

6 9/16

6

1 3/8

7 1/16

1/2

16

25

11 1/4

16 1/8

4 7/16

7 9/16

6

1 3/8

8 1/16

1/2

18

27

12 1/4

18 1/8

4 7/16

8 9/16

6

1 3/8

9 1/16

1/2

20

29

13 1/4

20 1/8

4 7/16

9 9/16

6

1 3/8

10 1/16

1/2

24

33

15 1/4

24 1/8

4 7/16

11 9/16

6

1 3/8

12 1/16

1/2

30

39

18 1/4

30 1/8

4 7/16

14 9/16

6

1 3/8

15 1/16

1/2

36

45

21 1/4

36 1/8

4 7/16

17 9/16

6

1 3/8

18 1/16

1/2

  • ARRESTOR TYPE HOLD-DOWN


MATERIAL: Alloy steel, carbon steel, stainless steel 304/304L, stainless steel 316 /316L, etc.
FINISH: Black, cold galvanized, hot dipped galvanized (HDG), painted/coated surface for carbon steels, pickled surface for stainless steels.
TEMP: 200°F (95°C)
APPLICATIONS: Fig. PTP HD-3 hold down pipe clamp is an arrestor type hold down. This hold down clamp is actually a restraint that is used when there is very low thermal movement. Its radius is lined with a belting material that is well designed to absorb shock from vibration. This type is generally used on compressor lines or similar application.
ORDERING: Specify figure number, pipe size and description.
NOTE: Belting material remains impervious to heat up to 200°F.

PIPE SIZE

A

B

C

D

E

R

T

2

9 7/8

3 7/16

2 7/8

3 1/2

1 3/16

1 7/16

1/4

3

11

4

4

3 1/2

1 3/4

2

3/8

4

12

4 1/2

5

3 1/2

2 1/4

2 1/2

3/8

6

14 1/8

5 9/16

7 1/8

3 1/2

3 5/16

3 9/16

3/8

8

16 1/2

6 3/4

9 1/8

3 11/16

4 5/16

4 9/16

3/8

10

19 1/2

8 1/4

11 1/4

4 1/8

5 3/8

5 5/8

3/8

12

21 1/2

9 1/4

13 1/4

4 1/8

6 3/8

6 5/8

1/2

14

23 1/2

10 1/4

14 1/2

4 1/2

7

7 1/4

1/2

16

25 1/2

11 1/4

16 1/2

4 1/2

8

8 1/4

1/2

18

27 1/2

12 1/4

18 1/2

4 1/2

9

9 1/4

1/2

20

29 1/2

13 1/4

20 1/2

4 1/2

10

10 1/4

1/2

24

33 1/2

15 1/4

24 1/2

4 1/2

12

12 1/4

1/2

30

39 1/2

18 1/4

30 1/2

4 1/2

15

15 1/4

1/2

36

45 1/2

21 1/4

36 1/2

4 1/2

18

18 1/4

1/2

 

  • Insulated Pipe Supports

    • INSULATED SHOE SUPPORT FOR HOT PIPE (HOT SHOE)



MATERIAL: Shield and jacket – Galvanized carbon steel, stainless steel 304, 316
INSULATION: Asbestos free calcium silicate and/or high-density calcium silicate, such as POLYURETHANE & PHENOLIC FOAM
BONDING: Insulation, galvanized jacket and shield can be bonded per customer specifications.
OPTIONS: Support design can be modified for length, insulation thickness, higher load and axial movement. Slide plates are available upon request. Please specify by “-SL” after figure number.
HOW TO ORDER: Specify figure number, pipe size, description, insulation, thickness, and slide plate material, if desired.

PIPE
SIZE

H (in.)

L (in.)

AXIAL MVMT. (in.)

LOAD
CAPACITY (lb.)

APPROX.
WEIGHT (lb.)

3

4

12

4

350

39

4

4

12

4

375

50

6

4

12

4

675

77

8

4

12

4

900

99

10

4

12

4

1100

108

12

4

12

4

1325

122

14

4

12

4

1500

127

16

4

12

4

1700

137

18

4

12

4

1875

191

20

4

12

4

2075

205

24

4

12

4

2500

232

“H” dimension given above is based on 2″ insulation thickness. Please mention in your inquiry if it is different than listed above. Contact us for your requirements other than those listed above.

 

  • INSULATED SHOE SUPPORT FOR COLD PIPE (COLD SHOES)


MATERIAL: Shield and jacket – Galvanized carbon steel, stainless steel 304, 316
INSULATION: High density Polyurethane (PUF)
BONDING: Galvanized jacket, vapor barrier and polyurethane insulation can be bonded per customer specifications.
COATING: Inside surface of polyurethane insulation is covered with pressure sensitive tape and exposed surfaces are coated with monolar mastic.
OPTIONS: Support design can be modified for length, insulation thickness, higher load capacity, and axial movement. Slide plates are also available upon request. Please specify by “-SL” after figure number.
HOW TO ORDER: Specify figure number, pipe size, description, insulation, thickness, and slide plate material, if desired.

PIPE
SIZE

H (in.)

L (in.)

AXIAL MVMT. (in.)

LOAD
CAPACITY (lb.)

APPROX.
WEIGHT (lb.)

3

4

12

4

320

38

4

4

12

4

610

44

6

4

12

4

900

75

8

4

12

4

1490

100

10

4

12

4

1850

108

12

4

12

4

2200

123

14

4

12

4

5900

132

16

4

12

4

6700

143

18

4

12

4

7500

197

20

4

12

4

8400

212

24

4

12

4

10100

240

“H” dimension given above is based on 2″ insulation thickness. Please mention in your inquiry if it is different than listed above. Contact us for your requirements other than those listed above.

  • CLAMPED SHOE FOR INSULATED COLD LINES


MATERIAL: Clamps and base – stainless steel. Base plate – carbon steel.
INSULATION: Micarta® or Permali®, or equivalent
OPTIONS: Support design can be modified for length, insulation thickness and axial movement. Slide plates and guides are also available upon request.
HOW TO ORDER: Specify figure number, pipe size and insulation thickness. Also specify any special dimensions.

PIPE SIZE

H (in.)

L (in.)

Axial
Movement (in.)

Vertical
Load (lb.)

APPROX.
WEIGHT (lb.)

3

6

12

4

4000

34

4

6

12

4

5000

35

6

6

12

4

6000

52

8

6

12

4

6000

60

10

6

12

4

8000

93

12

6

12

4

8000

136

14

6

12

4

8000

164

16

6

12

4

12000

183

18

8

12

4

12000

352

20

8

12

4

15000

415

24

8

12

4

15000

538

Contact us for your requirements other than those listed above.

  • CLAMPED SHOE PIPE SUPPORTS

    • BOLT CRADLE CLAMPED SHOE SUPPORT WITH BONDED/BOLTED SLIDE PLATE (WELDED BASE)


MATERIAL: Carbon steel, Stainless steel 304, stainless steel 316
FINISH: Painted or hot dipped galvanized for carbon steel; pickled or sandblasted for stainless steel
OPTIONS: Modifications in the dimensions A, B, C, D, and the slide plate material (PTFE, 25% glass filled or graphite) available upon request.
ORDERING: Specify figure number, pipe size, description, type, quantity, finish and slide plate material.
ALLOWABLE LOADS: The allowable vertical loads depend upon the pipe pressure and wall thickness.
BONDING: Graphite slide plates are usually bonded. For high temperature service above 500°F specify bolted construction.
NOTE: End Plates provided for pipe sizes 3″ & above

PIPE SIZE

A

B

C

D

H

2

4

12

5 1/2

5

5 3/16

2 1/2

4

12

6 3/8

5

5 7/16

3

4

12

7

5

5 3/4

4

4

12

8 9/16

5

6 1/4

5

4

12

9 11/16

5

6 13/16

6

4

12

11 5/8

5

7 5/16

8

4

12

13 7/8

5

8 5/16

10

4

12

17

5

9 3/8

12

4

12

18 15/16

5

10 3/8

14

4

12

21

5

11

16

4

12

23

5

12

18

7

15

25 7/8

5 1/2

13

20

7

15

28

5 1/2

14

24

7

15

33 1/2

5 1/2

16

  • BOLT CRADLE CLAMPED SHOE SUPPORT WITH BONDED/BOLTED SLIDE PLATE (BOLTED BASE)



MATERIAL: Carbon steel, Stainless steel 304, stainless steel 316
FINISH: Painted or hot dipped galvanized for carbon steel; pickled or sandblasted for stainless steel
OPTIONS: Modifications in the dimensions A, B, C, D, and the slide plate material (PTFE, 25% glass filled or graphite) available upon request.
ORDERING: Specify figure number, pipe size, description, type, quantity, finish and slide plate material.
ALLOWABLE LOADS: The allowable vertical loads depend upon the pipe pressure and wall thickness.
BONDING: Graphite slide plates are usually bonded. For high temperature service above 500°F specify bolted construction.
NOTE: End Plates provided for pipe sizes 3″ & above

PIPE SIZE

A

B

C

D

E

F

H

2

4

16

5 1/2

18

5

13/16

5 3/16

2 1/2

4

16

6 3/8

18

5

13/16

5 7/16

3

4

16

7

18

5

13/16

5 3/4

4

4

16

8 9/16

18

5

13/16

6 1/4

5

4

16

9 11/16

18

5

13/16

6 13/16

6

4

16

11 5/8

18

5

13/16

7 5/16

8

4

16

13 7/8

18

5

13/16

8 5/16

10

4

16

17

18

5

13/16

9 3/8

12

4

16

18 15/16

18

5

13/16

10 3/8

14

4

16

21

18

5

13/16

11

16

4

16

23

18

5

13/16

12

18

7

18 1/2

25 7/8

21

5 1/2

15/16

13

20

7

18 1/2

28

21

5 1/2

15/16

14

24

7

18 1/2

33 1/2

21

5 1/2

15/16

16

  • BOLT CRADLE CLAMPED SHOE SUPPORT WITH GUIDE & SLIDE PLATE (WELDED BASE)



MATERIAL: Carbon steel, Stainless steel 304, stainless steel 316
FINISH: Painted or hot dipped galvanized for carbon steel; pickled or sandblasted for stainless steel
OPTIONS: Modifications in the dimensions A, C, D, E, and the slide plate material (PTFE, 25% glass filled or graphite) available upon request.
ORDERING: Specify figure number, pipe size, description, type, quantity, finish and slide plate material.
ALLOWABLE LOADS: The allowable vertical loads depend upon the pipe pressure and wall thickness.
BONDING: Graphite slide plates are usually bonded. For high temperature service above 500 °F specify bolted construction.

PIPE SIZE

A

C

D

E

H

2

4

5 1/2

7 1/4

5

5 3/16

2 1/2

4

6 3/8

7 1/4

5

5 7/16

3

4

7

7 1/4

5

5 3/4

4

4

8 9/16

7 1/4

5

6 1/4

5

4

9 11/16

7 1/4

5

6 13/16

6

4

11 5/8

7 1/4

5

7 5/16

8

4

13 7/8

7 1/4

5

8 5/16

10

4

17

7 1/4

5

9 3/8

12

4

18 15/16

7 1/4

5

10 3/8

14

4

21

7 1/4

5

11

16

4

23

7 1/4

5

12

18

7

25 7/8

10 3/4

5 1/2

13

20

7

28

10 3/4

5 1/2

14

24

7

33 1/2

11 1/4

5 1/2

16

 

  • BOLT CRADLE CLAMPED SHOE SUPPORT WITH GUIDE & SLIDE PLATE (BOLTED BASE)


MATERIAL: Carbon steel, Stainless steel 304, stainless steel 316
FINISH: Painted or hot dipped galvanized for carbon steel; pickled or sandblasted for stainless steel
OPTIONS: Modifications in the dimensions A, B, C, D, and the slide plate material (PTFE, 25% glass filled or graphite) available upon request.
ORDERING: Specify figure number, pipe size, description, type, quantity, finish and slide plate material.
ALLOWABLE LOADS: The allowable vertical loads depend upon the pipe pressure and wall thickness.
BONDING: Graphite slide plates are usually bonded. For high temperature service above 500°F specify bolted construction.

PIPE SIZE

A

B

C

D

E

F

H

2

4

9 1/4

5 1/2

11 1/4

5

13/16

5 3/16

2 1/2

4

9 1/4

6 3/8

11 1/4

5

13/16

5 7/16

3

4

9 1/4

7

11 1/4

5

13/16

5 3/4

4

4

9 1/4

8 9/16

11 1/4

5

13/16

6 1/4

5

4

9 1/4

9 11/16

11 1/4

5

13/16

6 13/16

6

4

9 1/4

11 5/8

11 1/4

5

13/16

7 5/16

8

4

9 1/4

13 7/8

11 1/4

5

13/16

8 5/16

10

4

9 1/4

17

11 1/4

5

13/16

9 3/8

12

4

9 1/4

18 15/16

11 1/4

5

13/16

10 3/8

14

4

9 1/4

21

11 1/4

5

13/16

11

16

4

9 1/4

23

11 1/4

5

13/16

12

18

7

13 3/4

25 7/8

16 1/4

5 1/2

15/16

13

20

7

13 3/4

28

16 1/4

5 1/2

15/16

14

24

7

14 1/4

33 1/2

16 1/4

5 1/2

15/16

16

 

Besides the above pipe clamps, riser clamps, pipe supports, shoe supports, our factory also manufactures various customized pipe clamps & supports according to customers’ drawings and specifications.

Main advantages of our pipe clamps / pipe support

Our pipe clamp factory is a leading China pipe clamp and pipe support manufacturer, our company and pipe clamps & supports gained very good reputation from our customers for the below advantages and features.

  • Rich and mature manufacturing experience: our factory has nearly 30 years manufacturing experience for various pipe clamps, pipe hangers and pipe supports;
  • Advanced manufacturing equipment and facilities, including: etc. Our professional engineers do regular scheduled maintenance on these machines to guarantee them work well. All these above ensure us to produce high quality pipe clamps and supports.
  • High quality raw material: our raw materials for steel pipe clamps (steel pipe supports) are mainly from the famous China steel makers, such as TPCO, SHA STEEL, BAO STEEL, which are best and largest steel manufacturers in China. And the plastics, rubbers and other raw materials for tube clamps & supports also are from famous manufacturers.
  • We perform very strict incoming quality inspection for the raw materials.
  • Reliable Packing: Normally the pipe clamps and supports will be packed in cartons, and then we pack the cartons on pallets firmly, and if customers request, we can also pack the pipe supports into wooden cases. The package is suitable for sea transportation, air transportation and land transportation.
  • Strictly quality control: Our factory has a QC team of more than 20 persons. Every pipe clamp and pipe support will be inspected before shipment. The inspections are carried according to corresponding standards and customers’ requests, main test which including: Chemical Analysis Test, Tensile Test, Dimension Inspection, Spray salt Test, Coating thickness test, and other tests according to standards and cusotmer’s requirements.
  • Mature quality management system: our Total quality management system ensures all the working processes related to product quality are in good control.
  • Our tube clamps are with strong strength, accurate dimensions, good corrosion resistance, UV, weathering and chemical resistance – even under extreme conditions, and durable in use.

 

Applications of our Pipe Clamps / Pipe supports

As one of the most professional China pipe clamp manufacturers, our pipe clamps, pipe hangers and pipe supports are widely used in almost all industries.

Benefit on meeting high industry standards, our pipe clamps can be used in a wide range of industries, including:

  • Various hydraulic systems
  • Marine, ship building, offshore industries
  • Medical
  • Petroleum, Oil and Gas
  • Pharmaceutical
  • Automotive
  • Chemical industries
  • Cookware
  • Construction Machinery
  • Food Processing industries
  • Heavy Equipment
  • Metallurgy
  • Electrical power